Pellet Stove Dealers Near Me
Pellet stoves make use of solid combustible pellets made of compressed sawdust or wood waste to heat up your home. Some models burn biofuels such as nutshells or corn kernels.
Pellet stoves do not come with a chimney and require electricity to operate the auger that feeds the pellets to the fire. This is why some manufacturers offer backup battery systems to ensure that the stove will continue operating in the event of a power failure.
Freestanding Pellet Stoves
Homeowners who are looking for supplemental heat often choose freestanding pellet stoves. They can be used to heat one or multiple rooms and are simple to clean and operate. These stoves use pellets that are made of compressed sawdust, similar to what your pet rabbit eats. The pellets are stored in the hopper and an electric auger feeds them into the combustion chamber to ignite them. As they burn, wood pellets create heat that radiates into the room, and then circulates through an air blower. This type of heat is more attractive than a traditional wood stove or mini-split ductless, and it's also less costly to run than a gas or propane furnace.
Pellet stoves may have a minimalist design that is less intrusive than wood-burning models. They are also simpler to maintain than fireplaces and come with digital controls that allow you to easily control the amount of heat produced. Certain models can be programmed and linked to a thermostat, which can save homeowners money on heating expenses.
When choosing a pellet stove it is recommended to select one that has been approved by the U.S. Environmental Protection Agency for clean burning and efficiency and is also certified by a third-party organisation like the Pellet Fuels Institute (PFI). Look for the Underwriters Laboratories certification or Canadian ULC label that proves that the stove meets safety standards.
Since these appliances rely on electricity to operate their automated features, you'll want an idea of what you should do in the event of a power outage. Some models, like the Piazzetta Marcella 2.0 has batteries which keeps their fans and automatic pellet feeders running even when the power goes out.
Pellet Stoves with Pellet Inserts
Pellet stove inserts can be inserted inside a fireplace to replace a traditional wood-burning fire. They are high-efficiency and offer plenty of heating power, just like freestanding pellet stoves. They also make use of renewable fuel sources instead of fossil fuels or wood, and don't produce any greenhouse gases during combustion. The savings in energy costs can add up over time. You may also be eligible for a 30% discount on the cost of your insert (up to $2,000 per year).
The primary distinction between pellets and wood fireplace inserts is that they burn compressed milled wood byproducts, rather than seasoned wood. This makes them more hot and quicker than traditional wood-burning fireplaces. This reduces emissions and improves efficiency in energy use. They also consume less ash and are more convenient to use, with auto-ignition and self-starting features that make lighting the fire simple. The fire is continuously fed via a hopper, meaning you don't have to manually feed it as you would with a wood-burning fireplace.
Pellet fireplace inserts have some disadvantages. One of the disadvantages is that they require a large amount of dry storage space to store the pellet fuel. They also depend on electricity to power their automated features, which means they may not be a viable option during a power outage. Additionally, some models emit noise during operation, so they might not be the best choice for a quiet home.
Custom Pellet Stoves
Pellet stoves are a cleaner, more efficient alternative to traditional wood stoves and fireplaces. Pellets made from compressed wood sawdust and other wood byproducts are used to make them more eco-friendly than burning wood. They also emit less pollution than wood stoves. Pellet stoves are becoming popular due to their lower operating costs and easy to use. If you're looking for an electric stove to heat your basement, or a new pellet stove for your home, there are plenty of options on the market.
If you're interested in buying pellet stoves, search for a dealer with experience with these hearth products. A good dealer will provide professional advice, help you install the stove correctly and will maintain it if needed. A factory-trained technician is a key element of the process and will assist you in understanding your stove's unique operation and maintenance needs.
The size of your house and your heating requirements will determine which stove is the best for you. You'll typically want to choose one that can supply the equivalent of 5,000 British Thermal Units (BTUs), or heating power, for every 200 square feet of living space. You should also think about how much you're willing to spend for fuel and any other heat sources in your home.
It's important to know that pellet stoves are intended for supplemental heating not as primary. They don't replace a furnace and are not designed to be used in homes that have inadequate insulation. They should only be installed only in areas with sufficient access to an existing venting system. Pellet stoves can also require electricity to operate their automated features such as the fan and pellet feeder. If the power goes out, these devices can still operate by hand or using batteries backup systems.
Pellet Stove Repair
Pellet stoves require regular maintenance to run efficiently and safely. It's important to recognize indications that your stove is experiencing issues in order to avoid costly repairs in the future. For instance, if the flame dances lazily and has black tips, a lack of air is probably the culprit. This issue could be caused by dirty burners, a blocked auger, hopper or heat setting. In this case, it is best to speak with a technician for your fireplace for assistance.
A professional will usually assess a pellet stove's needs and carry out necessary maintenance for $100-$150 per hour. This includes cleaning the stove, repairing or replacing the exhaust fan, as well as making sure that the moving parts are lubricated. Repair costs vary depending on how complex the issue is. A qualified technician should calculate the cost prior to performing any work.
Common problems that require professional assistance are soot or smoke emanating from the chimney, low heat, and noisy operation. A damaged damper or blower could also be a cause of these problems. A local fireplace technician will replace the blower or damper for $380-$550.
Another common problem is that the motor of the auger fails. similar website could be a major issue, since it can affect the stove's ability to transfer the fuel into the burn pot. wood and pellet stove can cost between $80 and $150, and it could take a local chimney technician as long as three hours to install the replacement. You should also clean the hopper as well as the firepit on a regular basis. This will decrease the amount of ash that collects on the glass and block the view of the flame. For instance a local fireplace technician can take off the burn pot cover and use a special brush to remove the ash that has accumulated.
Pellet Stove Installation
A pellet stove can be erected inside a new house or converted into an insert fireplace that burns wood. Prices for installation differ based on the location, but they begin at $1,000 for freestanding models and range from $3,000 to $5,000 for a wall-mounted model. Venting systems can add up to $1,200 or $500 depending on whether you want vents in the horizontal direction, a ceiling vent, or one that requires a chimney.
Pellet stoves offer a variety of advantages that make them more practical and economical than other heating sources. They burn less fuel than wood-burning or gas stoves, and can be set to automatically turn off and on at predetermined times. They also allow you to select between low and high temperatures making them more flexible than traditional wood stoves.
The size and type of pellet stove that you require will depend on the amount of heat you require for your home. In general you will require about 5,000 British Thermal Units (BTUs) to heat 200 square feet of living space. However, factors like insulation and climate can influence the calculation.
When you are looking for a pellet stove, consider how much fuel you will require and where you will store it in your home. A dealer can help you determine how many BTUs your home requires by visiting the stove and taking measurements. A professional can recommend the ideal pellet stove for your home, in accordance with the space you need to heat.
A pellet stove uses electricity to run its motorized components, therefore it should be situated near a power outlet that is able to handle 110 volts. It is recommended to install an emergency generator to keep the pellet stove running in the event of a power outage.